How to choose Vacuum lifter
Vacuum Lifter is a very useful tool for loading the sheet, which is to improve the efficiency for the loading for the sheet,
especially for the thin material.If without the vacuum lifter, normally it is not easy to load the sheet if take 0.5mm
thickness stainless steel sheet, so here Vacuum lifter is very necessary.
But how to choose the suitable vacuum lifter, what factor we need to consider?
The points we need to consider
What is the size of the sheet? Take example, the most often size we use is 3000*1500mm, 4000*2000mm.
What is the weight of the sheet? Normally we take the calculation like this
Weight:7.85*W*L*T, W:Width, L: Length, T: Thickness.
So take 6mm Carbon Steel 3015 for example.
The weight is 7.85*3*1.5*6=212kgs.
Then we need to your factory have the crane or not?
If no have the crane, we can also offer the cantilever crane(JIB CRANE).
If customer have the crane, then we need to choose the vacuum suction pads
Currently we have two types, One is Electric Type, one is Battery type.
If Electric type, we need to know the local industrical votlage and frequency, then we can choose the pump motor accordingly.
For the pump, what we choose is from Beker or Thomas, which is with good quality that can be used for long time.
And for the battery type, we choose Panosonic, normally one pcs can use 1-2 days, and the other one can charge which this one use.
Also many customers would like to ask us, how many vacuum pads you will use and it is enough to suck the material and it is eequal to load the sheet?
Yes, it is a really good question, normally we use pads 2 sizes, one is Diameters 300mm, one is diameters 230mm,diameters 300mm can load 200kgs/pcs, and Diameters 230mm can load 100kgs, if the weight is 1000kgs, so we need at least 5 pcs of the Diamters of
300mm, normally will use 6pcs,which is easily to distributer and load the sheet equally.
Is it safe once the power off if we use the electric type?
Safety is the most important issue we need to consider, especially in some developed countries, the cost for the vacuum lifter is
not high, but the operator hurt,it is a lot of cost.So if this kind of problems can not make sure, it is also very difficult to be so
popular in the market.So we have a pressure keeping device,once even the electricity is off, the vacuum lifter at least to
use 15 minutes, it is enough time for the operator to release the sheet and wait for the electricity
AC TYPE
DC Type
For the weight, currently we have 2 types, one is pneumatic type, one is electric type, normally if less than 500kg, we can use the pneumatic type to save the cost, if more than 500kgs, we can use our Electric type
Cantilever Crane(JIB CRANE)
Electric Hoist
Finally, let us to have a look at the vacuum lifter running
This is all the steps to choose Remcor Technology Vacuum Lifter, more details, please message us +86 15623778177, thanks
QQ客服