Coil Sheet Production Line

Coil sheet laser cutting line

Product ID：Coil Sheet Production Line
Phone: +86 17612771229
Email: info@remcortechnology.com
Time: 2022-08-14 08:48

Coil Sheet Laser Cutting lines

Coil Sheet laser cutting line is composed of 1250mm De-coiler Straightener, laser cutting machine, and conveying belt, which realizes the one-time completion of automatic blanking from roll material to forming plate.

Features:

★Full-line brand integration: Laser has the integration capabilities of all laser brands, which can be recommended and tailored according to your needs;

★Double-motor synchronous linkage: The equipment adopts dual-motor synchronous linkage, which makes the exchange process of the interchangeable double Workbench faster and more stable;

Technical Parameters

Laser cutting
1	Laser power	1KW-6KW
2	Processing area	3000mm × 1500mm
3	X, Y axis positioning speed	± 0. 05 mm/m
4	X and Y axis repeat positioning accuracy	± 0.03mm
5	Maximum operating speed	120 m/min
6	Maximum acceleration	1.2G
7	Maximum load weight of the table	800kg
8	Machine weight	6.5T
9	Dimensions (length, width and height)	6m × 2.92m × 2.0mm
Automatic material rack
10	De-coiler roll width	300-1250mm/10T
11	De-coiler load coil weight	10T
12	Roll inner hole	φ 508mm
13	Coil outer hole	φ 1300mm
14	Correction roller	Up 5/Lower 4
15	Outfeed speed	16 m/min

1, Main equipment configuration

No.	Item	Key components	Origin	Remarks
1	Laser	Max	China
2	Laser cutting head	Raytools	Shanghai
3	Servo drive	Panasonic	Japan
4	Servo motor	Panasonic	Japan
5	Reducer	Faston	Taiwan
6	Proportional valve	SMC	Japan
7	Bearing	NSK	Japan
8	XY axis rack	YYC	Taiwan
9	Gear	YYC	Taiwan
10	Straight rail	HIWIN	Taiwan
11	Bed	Remcor	China
12	Main beam	Remcor	China
13	Sub-beam	Remcor	China
14	System	Cypcut	Shanghai
16	Console	Remcor	China
17	Chillers	Hanli	China	Double temperature dual control
18	Dust extraction system	PLE	China	Segmented
19	Cylinder	Airtac	Taiwan
20	Excretion system	Drawer trolley collection device	China	PLE
21	Check valve	SMC	Japan
22	Solenoid valve	Airtac	Taiwan
23	Gear oil pump	Domestic	China
24	Regulated power supply	Domestic	Shanghai

2, Main technical parameters

No.	Item		Parameters
1	Device model		RN3015N
2	Processing format		3000 × 1500 (mm):
3	Fixed countertop		Complete
4	Y-axis transverse effective cutting range		3000mm
5	X-axis longitudinal effective cutting model		1500mm
6	Z axis travel		150mm
7	Laser power		1KW-6KW
8	Power supply		3 phase 380V 50HZ
9	CNC system		Cypcut Controller
10	Display		21.5 inch LCD
11	Rack (Bevel)		YYC
12	Reducer		Faston
13	Servo drive system		Japanese Panasonic Servo Drive
14	Motor system		Japan Panasonic Servo Motor
15	Maximum load of the Workbench		Load 800Kg
16	Maximum acceleration		1.2G
17	Slit width		0.15-0.3mm
18	Coke length		F 150MM
19	Capacitance height following		System matching
20	Minimum set Unit:		0.01mm
21	Fiber laser power and maximum cutting thickness (reference)
	Laser power	Cutting carbon steel thickness		Stainless steel/aluminum alloy
	1500W	Cutting thickness: refer to the following technical parameters
22	Protective Cover		√
23	Controlled protective gas		√
24	Edge detection		√
25	Gas system		√
26	Red light indication		√
27	Expert database		√
28	Gantry overall transportation		√
29	Compressed air supply system		Customer-owned
30	Mapping system		√
31	Fixed console		√
32	Alarm light system		√
33	Machine tool noise level:		≤ 75dB
34	Cutting surface slope		≤ 1 degree, small deformation
35	Wavelength		1080±5 nm
36	Laser divergence angle (half angle)		Less than 1.5rad
37	X axis:
	Fast moving speed		120 m/min
	X-axis positioning speed		80-100 m/min
	Positioning accuracy		0.03mm/1000mm
	Repeated positioning accuracy		0.03mm
38	Y axis:
	Fast moving speed		120 m/min
	Y-axis positioning speed		80-100 m/min
	Positioning accuracy		0.03mm/1000mm
	Repeated positioning accuracy		0.03mm
39	Maximum linkage speed		≤ 120 m/min
40	Z axis:
	Cutting head lifting stroke		150mm
41	Deviation degree		≤ 0.03mm